Description
Wetblast Injector System
The only conversion kit on the market that modifies a dry-blast machine into a high-production wetblast system.
High-Performance Wetblast Capabilities
Take on any job that a full-scale wetblast system can:
- Water-adjustment controls at operator’s fingertips for precise fine-tuning of water flow into the blast stream.
- Water and media mix before entering the blast nozzle, which helps:
- Maintain high media exit velocity, ensuring efficient blasting.
- Fully saturate media with water, improving dust suppression for visibility and regulatory compliance.
- Ensure thorough wash down of blast surface for a contaminant-free finish.
Easy to Use
Quickly and easily available for any job:
- Compact and lightweight.
- Easy to transport and store because it takes up little space.
- Simple setup. Connect to:
- A compressed-air source.
- A pressurized, municipal water source such as an outdoor spigot or a kitchen faucet.
- Or use the water pump that comes standard with the Wetblast Injector to retrieve water from a storage tank.
Application Versatility
Switch back to dry blasting with the twist of a knob:
- Take on wet- and dry-blast jobs.
- No need to buy a second piece of equipment. The Wetblast Injector converts the dry-blast pot you already have into a complete wetblast system.
Compliance
Allows you to comply with environmental safety regulations and safeguard your operators from exposure to hazardous dust:
- Suppresses dust generated during abrasive blasting, reducing operator, co-worker, and bystander exposure to hazardous dust.
- Helps satisfy urban dust-abatement requirements when blasting in metropolitan areas.
- Decreases dust-containment and cleanup costs, saving you time and expense.
Specifications – Six Configurations
One Operator
- 1-1/4” nozzle adaptor
- 50 mm nozzle adaptor – 1-1/4” entry
- 50 mm nozzle adaptor – 1” entry
Two Operators
- 1-1/4” nozzle adaptor
- 50 mm nozzle adaptor – 1-1/4” entry
- 50 mm nozzle adaptor – 1” entry
Wetblast Attachment
For contractors who don’t wetblast every day—but need to be
ready for wetblast jobs.
Application Versatility
Wetblast capabilities quickly installed on your dry-blast machine at
a low upfront cost.
- Water-adjustment valve at operator’s fingertips for adjusting water flow into media after it exits the blast nozzle.
- Best suited for contractors who primarily dry blast but need wetblast capabilities in their back pocket.
Easy to Use
Quickly and easily ready for wetblast jobs:
- Simple to install and detach.
- Compact and lightweight. Could fit in your toolbox. Easy to store.
- Simple, low-maintenance design.
- Does not require an air supply.
Compliance
Allows you to comply with environmental safety regulations and safeguard your operators from exposure to hazardous dust:
- Suppresses dust generated during abrasive blasting, reducing operator, co-worker, and bystander exposure to hazardous dust.
- Helps satisfy urban dust-abatement requirements when blasting in metropolitan areas.
- Decreases dust-containment and cleanup costs, saving you time and expense.
Requirements for Operation
- Access to a pressurized, municipal water source such as an outdoor spigot or a kitchen faucet.
- Can also be connected to a water storage tank, but you need to supply the water pump.
Specifications – One Configuration
- Use with all standard nozzles except CT nozzles.
- Includes water ring, water-adjustment valve, flexible hose, and garden-hose fitting.
